STORM TRACTOR SET-UP S.O.P.

 

TO BE PERFORMED AT REAR OF C.C.T.V. VAN:

 

1.   Remove camera head from main line tractor by disconnecting the pig-tails and

      removing the mounting screws from front skid.

2.   Install the storm tractor adapter bracket using the existing screws.

3.   Plug in the pig-tail to the bulkhead connector at the rear of the storm tractor.

4.   Raise the storm tractor scissor lift by depressing the raise button on the camera

      control

      pendant.

5.   Secure the camera head with adapter bracket, to the top of the storm tractor scissor lift 

      using the four hex head screw.

6.   Re-connect the camera head pig-tail.

7.   Test camera operation.

8.   Lower the storm tractor scissor lift by depressing the lower button on the camera

      control pendant.

9.   Secure the winch cable to the storm tractor with the bridle clasp.

10. Place and secure the storm tractor in the cargo area of the C.C.T.V. VAN using the jib

      boom winch.(see boom winch S.O.P.)